ORGANIZATION AND TECHNOLOGICAL STUDIES ON BUILDING RECONSTRUCTION USING CONVENTIONAL AND MODERN METHODS

  • O. Nyzhnyk Poltava National Technical Yuri Kondratyuk University
  • Yu. Dryzhyruk Полтавський національний технічний університет імені Юрія Кондратюка
  • A. Boyko Poltava National Technical Yuri Kondratyuk University

Анотація

This article represents a short organization and technological analysis of finalizing the
construction, using both conventional work materials and modern lightweight structures of fast
assembling. The studies are done on the basis of «L» teaching block, which is in Poltava
National Technical Yuri Kondratyuk University. Results of the study showed that it needs
reconstruction. All-inclusive organization and technological and economical comparison of
these two variants of the buildup proved that it is more advanced to carry out building works
using modern technologies, even though they need more manpower effort and are more
expensive. Nowadays we can observe a tendency to widely use fast mounting structures and it
will only become more wide-spread in the future, which will inevitably result in both
technologies and engineer construction equipment cheapening.
Keywords: reconstruction, erecting, conventional work materials, light gauge steel
framing, thermal modernization.

Дані про автора

A. Boyko, Poltava National Technical Yuri Kondratyuk University
student

Посилання

1. Tehnichna ekspluatatsiya, rekonstruktsiya i modernizatsiya budivel : navchalniy posibnik / I. Gavrilyuk ta in. – Lviv : NU «Lvivska politehnika», 2006. – 540 s.

2. Tehnologiya vozvedeniya zdaniy i sooruzheniy: ucheb. dlya stroit. vuzov / V. I. Telichenko, O. M. Terentev, A. A. Lapidu. – M. : Vyssh. shk., 2004. – 446 s.

3. Shcherbinin L. G. Zvedennya karkasnih monolitnih bagatopoverhovih zhitlovih i gromadskih budivel v obmezhenih umovah zabudovi bez vikoristannya budivelnih kraniv / L. G. Shcherbinin // Zbirnik naukovih prats. Seriya: Galuzeve mashinobuduvannya, budivnitstvo. – Poltava : PoltNTU, 2013. – Vip. 4(2). – S. 276 – 282. http://znp.pntu.edu.ua

4. Porivnyalna harakteristika legkih betoniv, yaki vikoristovuyutsya dlya pidvishchennya nesuchoyi
zdatnosti LSTK / S. A. Gudz, Yu. O. Avramenko, V. O. Sirobaba // Zbirnik naukovih prats. Seriya:
Galuzeve mashinobuduvannya, budivnitstvo. – Poltava : PoltNTU, 2014. – Vip. 1. – S. 202 – 207.
http://znp.pntu.edu.ua

5. DBN A.3.1-5-2009. Organizatsiya budivelnogo virobnitstva. – K., 2011. – 61 s.

6. Waite T.J. Steel-frame House Construction / T. J. Waite. – Craftsman Book Company, 2010. – 318 р.

7. Savyovskiy V. V. Tehnicheskaya diagnostika stroitelnyh konstruktsiy zdaniy / V. V. Savyovskiy. –
H.: Fort, 2008. – 560 s.

8. Savyovskiy V. V. Remont i rekonstruktsiya grazhdanskih zdaniy / V. V. Savyovskiy, O. N. Bolotskih. – H. : Vaterpas, 1999. – 288 s.

9. DBN V.1.2-12-2008. Budivnitstvo v umovah ushchilnenoyi zabudovi. – K., 2008. – 36 s.

10. Clarke J. L. Structural Lightweight Aggregate Concrete / J. L. Clarke – Taylor & Francis E-Libory,2005. – 128 р.

11. Vogdt F. Conceptual and structural design of building made of lightweight and infralightweight concrete / F. Vogdt, M. Schlaich, B. Hillemeir. – Berlin, 2010. – 105 р.

12. Yu W.-W. Cold-Formed Steel Design: third edition / W.-W. Yu. – New York: John Wiley & Sons Inc.,2000. – 645 p.
Опубліковано
2017-04-04
Як цитувати
Nyzhnyk O. Organization and technological studies on building reconstruction using conventional and modern methods / O. Nyzhnyk, Yu. Dryzhyruk, A. Boyko // ACADEMIC JOURNAL Series: Industrial Machine Building, Civil Engineering. – Полтава: ПНТУ, 2017. – Т. 2 (47). – С. 162-169. – Режим доступу: http://journals.pntu.edu.ua/znp/article/view/82 (дата звернення: 26.04.2018).